home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
cnlog20.zip
/
README
< prev
next >
Wrap
Text File
|
1990-08-02
|
4KB
|
91 lines
====================== REGISTERED USERS INFORMATION =======================
Thank you for registering CONLOG!
The file CNLOG200.EXE is a self-extracting archive set of files
which you should share with others for evaluation, or upload to your favorite
bulletin board. Please pass this file around rather than your
registered version. Thank you.
Self-extracting archive files are just as their name implies. By simply
executing CNLOG200.EXE, the file will unpack itself into the individual
files. If desired, the original CNLOG200.EXE file may then be erased
from your disk, as its job is done. Of course, as a registered user,
you have no need to extract these files, as your registered copies
are present on this disk already.
The file CONLOG.IBM is a version of the documentation which is
intended for printing on IBM/Epson compatible printers, since
it contains the control codes to alter printing fonts, etc.
It makes a prettier manual if your printer can handle it.
If not, use CONLOG.DOC. The text is the same.
73
WA9DRE
================= ALL USERS INFORMATION ==============================
----------- Printing the Instruction Manual ------------------
If you have a printer which prints the IBM box characters and
recognizes standard IBM/Epson control codes for double width,
boldface, etc., DO THIS:
COPY CONLOG.IBM PRN:
or:
PRINT CONLOG.IBM
(Note: Some distributions from bulletin boards may not have this
file due to space limitations. Instead, use the file
CONLOG.DOC. A purchased distribution disk will have
both files.)
If you have a printer which DOES NOT print the IBM box characters or
DOES NOT recognizes standard IBM/Epson control codes for double width,
boldface, etc., DO THIS:
COPY CONLOG.DOC PRN:
or:
PRINT CONLOG.DOC
!!!!!! BE SURE TO RUN THE INSTCLOG (INSTALLATION) PROGRAM BEFORE
ANY OTHER PROGRAMS. INSTCLOG IS REQUIRED TO SETUP THE
CONFIGURATION FILE WITH YOUR SPECIFIC INFORMATION !!!!!!!!!!
Configuration files for versions earlier than 1.80 will NOT work with version
2.00. However, do NOT erase your old CONLOG.PRM file, since INSTCLOG
is smart enough to retrieve all old information and make a new file.
If you have already established a configuration fiel for version 1.80
it will be used for version 2.00. There is no need to re-configure.
>>>>>>>>>>>>>>>>>>>>>>>>>>> VERSION 2.00 CHANGES <<<<<<<<<<<<<<<<<<<
IMPORTANT:
BEGINNING WITH VERSION 2.00 THE LOG FILES CREATED ARE NOT, REPEAT NOT,
ASCII TEXT FILES AND CANNOT, REPEAT CANNOT, BE EDITED WITH A TEXT
EDITOR OR WORD PROCESSOR. DO NOT, REPEAT DO NOT, ATTEMPT TO ACCESS
THESE FILES EXCEPT THROUGH THE CONLOG PROGRAM SYSTEM!
(The BACKUP.LOG file is still ASCII format.)
Refer to the full manual for details on editing and deleting log
entries.
There are other corrections and enhancements. PLEASE READ THE
INSTRUCTION MANUAL CAREFULLY!! Most questions can be answered
by simply reading the instructions! Thank you!
Regarding phone calls: Due to time limitations, I do not normally
offer online phone help. However, that does not stop people from
calling me <grin>. Please be advised, though, that I will be
working the Phone weekend of the contest, and I definitely will
NOT accept calls relative to any of my programs. No apologies --
where the sweepstakes is concerned, even my wife knows better than
to disturb me! Thank you for your cooperation, and I'll see you on
the bands. If you work me, let me know you're using CONLOG.
======================================================================
>> Please share this program with others and encourage them to
register CONLOG. <<
73,
Steve, WA9DRE